Ewp-Wa6330-Li-Fit WiFi Router High-Speed Ap Indoor Wireless Access Point Modem

• Work Mode: AP
• WiFi Antenna Type: Built-in
• Transmission Rate: >200Mbps
• Model NO.: EWP-WA6330-LI-FIT
• Certification: FCC
• Transport Package: Carton
• Specification: 210mm× 210mm× 45mm
• Trademark: H3C
• Origin: China

Product Description

 

Product Introduction

H3C WA6330-LI wireless product is a new generation 802.11ax AP product independently developed by New H3C Technology Co., Ltd. (H3C).It adopts tri-band 802.11ax design, which can be widely used in scenarios such as high-density user access and e-school bags.
WA6330-LI has a built-in smart antenna, supports tri-band access, small and beautiful appearance, flexible installation methods, suitable for wall-mounted, ceiling-mounted and other installation methods.
 

Next-generation 802.11ax technology design

The H3C WA6330-LI product adopts the new generation 802.11ax protocol, three-band 5-stream design, and the access rate of the whole machine can reach up to 2.833Gbps. The product has 2 fixed 5G radios, 5G radio 1 and 5G radio 2 are designed with 2 spatial streams, respectively, supporting 1.2Gbps access rate; the third radio uses 2.4G/5G to flexibly switch radios, and supports up to 433Mbps access It can perfectly meet the access requirements of ordinary high-density scenarios.

Realize multi-terminal simultaneous communication, break through the disadvantages of traditional wireless competition

H3C WA6330-LI AP supports MU-MIMO technology. MU-MIMO is the most important feature of 802.11ax. Through MU-MIMO technology, AP can send data to multiple terminals at the same time, that is, WA6330-LI can send data to multiple terminals at the same time. Data information, depending on the number of terminal streams. WA6330-LI can send wireless messages to up to 5 terminals at the same time, breaking through the traditional wireless network serial communication mechanism, the utilization rate of wireless spectrum resources has been doubled, the number of effective access users has been greatly improved, and the The deployment overhead of wireless networks improves the user experience in the case of high-density users.

Realize intelligent gigabit cloud access and high-quality wireless network TCO

The WA6330-LI AP complies with the 802.11ax protocol standard and can provide access to 3 different frequency bands. The third radio supports 2.4GHz/5GHz switching to achieve 1.2Gbps+1.2Gbps+0.433Gbps/0.2Gbps wireless transmission rates and single Port 2.5Gbps uplink. Through built-in antenna coverage technology, it can effectively provide higher-performance mobile cloud access services in terms of coverage, access density, and stable operation, and assist users to achieve high-quality wireless network TCO (Total Cost of Ownership) .

Support OFDMA technology (Orthogonal Frequency Division Multiple Access)

WA6330-LI wireless access point products support OFDMA technology, AP can further subdivide the wireless bandwidth, use different sub-carriers to transmit data to multiple terminals at the same time, reduce the multi-user air interface resource conflict and backoff in traditional protocols. Delay, improve the user experience of low-latency applications such as voice and video in multi-user scenarios.

Support spatial multiplexing technology

The WA6330-LI wireless access point product supports spatial multiplexing technology. The AP controls and adjusts the transmit power by identifying unrelated packets at the same time, which can solve the problem of co-channel interference in the process of multi-user use, and also greatly improve the utilization of spectrum resources.

Support TWT technology (target wake-up time)

The WA6330-LI wireless access point product supports the TWT technology, which allows the AP to make a unified scheduling arrangement for the wake-up and sleep of the terminal, which not only reduces the conflict between the terminals, but also reduces the unnecessary wake-up times of the terminal to achieve the purpose of energy saving.

Built-in IoT capabilities

The WA6330-LI product uses a built-in Bluetooth 4.0 module, which supports access management for IoT terminals such as Bluetooth. Bluetooth can support iBeacon shake feature.

Support expansion of IoT business

WA6330-LI supports external T320 series IoT modules. It adopts the chain deployment mode. A single port can connect up to 10 IoT modules in series, and hybrid expansion of full-standard IoT protocols such as ZigBee/RFID/BLE.

Green and low carbon design

WA6330-LI AP adopts professional green and low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced automatic power saving transmission (E-APSD), intelligently identifies the actual performance requirements of terminals, rationally allocates terminal sleep queues, and dynamically adjusts MIMO work model.
WA6330-LI AP supports Green AP mode, which realizes single-antenna standby and saves energy more accurately.
WA6330-LI AP uses innovative packet-by-packet power control (PPC) technology to dynamically adjust the direct bidirectional power between AP devices and clients on the premise of ensuring successful packet transmission, so as to reduce device energy consumption and prolong mobile terminal standby. role of time.

Provide local forwarding function

When the WA6330-LI AP (Fit mode) is forwarded through the WAN, the wireless access device is deployed in the branch, and the wireless controller is deployed in the headquarters, all user data is sent by the wireless access device to the wireless controller, and then controlled by the wireless server for centralized forwarding. The WA6330-LI AP can directly convert data packets into wired format packets on the wireless access device, so that data packets are forwarded locally without passing through the wireless controller, which greatly saves wired bandwidth.

Support IPv4/IPv6 dual protocol stack (Native IPv6)

The WA6330-LI AP fully supports IPv6 features, and the device implements IPv4/IPv6 dual protocol stacks. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register with the WX series controller to provide WLAN services without becoming an information island in the network.

Provide EAD wireless access

The End User Admission Domination (EAD) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces enterprise security policies for user terminals accessing the network. Linked with the security policy server, unqualified wireless clients that are infected with viruses or have system vulnerabilities can be processed in various ways, such as offline, isolation, reminder or monitoring. Only wireless clients are allowed to comply with the corresponding security policies Access the network normally, thereby improving the overall security of the wireless network.

Support remote probe analysis

The WA6330-LI AP supports a Sensor device for remote probe analysis. It can monitor and capture Wi-Fi packets in the coverage area and mirror it to the local analysis device in real time for network administrators to perform troubleshooting and optimization analysis. The remote probe analysis function can perform non-convergence mirroring for the working channel, or poll and sample all channels, flexibly meeting the wireless network monitoring operation and maintenance requirements.

Built-in RF Optimization Engine (ROE)

The WA6330-LI AP has a built-in RF Optimizing Engine, which effectively improves the application acceleration capability and quality assurance effect in scenarios such as high-density access and streaming media transmission in wireless deployment through RF optimization based on features and protocols. These include: multi-user fair scheduling, hybrid access fairness, filtering interference, rate optimization, spectrum navigation, multicast enhancement (IPv4/IPv6), packet-by-packet power control, and intelligent bandwidth assurance.

Support intelligent load balancing

The WA6330-LI AP supports a complex balancing method based on the number of access users and traffic. When the wireless controller finds that the load of the wireless access device exceeds the set threshold, the wireless controller will automatically calculate this value for the newly connected user. Whether there are wireless access devices with light load around the user that can be accessed by the user, if so, the user's association request will be rejected, and the user will switch to other wireless access devices with light load. In overlapping coverage areas, traditional load balancing methods often result in failure to connect to the network, resulting in false balancing. H3C's innovative support for intelligent load balancing technology ensures that the load balancing function is only activated for wireless users in overlapping coverage areas, effectively avoiding the occurrence of false balancing, thus maximizing the wireless network capacity.

Support Chinese SSID

The WA6330-LI AP supports the use of Chinese SSIDs, and can specify SSIDs with a maximum of 16 Chinese characters, and can also use mixed Chinese and English SSIDs, providing greater convenience for domestic users.

Fully support intelligent wired and wireless integrated management

All H3C series wireless products can implement WSM-based wired and wireless integrated management through open network management protocols.
WSM is a wireless operation management component developed by H3C on the basis of the next-generation business software platform iMC (intelligence Management Center/Intelligent Management Center). The scalability can meet the evolving needs of customer network management. The Web-based management system provides a simple and friendly management platform for wireless business managers. In cooperation with the iMC intelligent management platform and other components, it can also realize the panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions of wireless devices, and can unify other devices in the network. management, and truly realize intelligent wired and wireless integrated management.
 

 

Product Parameters

Hardware Specifications

Attributes	WA6330-LI
weight	0.94Kg
Dimensions (excluding antenna interface and accessories)	210mm×210mm×45mm
Ethernet interface	2 (both upstream and downstream) (1 100/1000M/2.5G electrical port, 1 10/100/1000M electrical port supports PSE expansion)
PoE (interface can support protocol)	Support 802.3at af power supply
local power supply	Support 54V DC
Console port	1
USB port	1 USB2.0 interface
Built-in antenna	Built-in smart antenna system
Built-in Bluetooth	Built-in Bluetooth 4.0
IoT expansion	Support chain IoT expansion capability, support up to 10 full-standard IoT expansions such as BLE, RFID, ZigBee, etc.
Working frequency	802.11ax/ac/n/a : 5.725GHz-5.850GHz (China); 5.47 GHz~5.725GHz; 5.15 GHz~5.35GHz (China) 802.11ax/b/g/n : 2.4GHz-2.483GHz (China)
Modulation technology	OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS : DBPSK@1Mbps, DQPSK@2Mbps, [email protected]/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9 MIMO-OFDM (11ax): MCS 0-11
Modulation	11b: DSS:[email protected]/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
Transmit power (single channel maximum)	20dBm
Adjustable power granularity	1dBm
reset/restore factory configuration	support
Status Indicator	Blink alternate flashing mode, orange green blue flashing mode in different working states, terminal access breathing flashing mode
Operating temperature/Storage temperature	-10ºC~55ºC/-40ºC~70ºC
Working Humidity/Storage Humidity	5%~95% (non-condensing)
Protection class	IP42
Machine power consumption	≤16.5W (excluding PSE and USB)
safety regulations	GB4943, EN60601-1-2 (medical), UL/CSA 60950-1, IEC/EN 60950-1, IEC/EN 62368-1
EMC	GB9254, EN301 489, EN55022, FCC Part 15, RSS-210
RF Certification	FCC Part 15, EN 300 328, EN 301 893, Type Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology
Health	FCC Bulletin OET-65C, EN 50385, IC Safety Code 6
MTBF	>850000H

 

Software Specifications

Attributes		WA6330-LI
Product Positioning		Indoor installation type tri-band (5.1G 2*2 MU-MIMO+5.8G 2*2 MU-MIMO+5G/2.4G 1*1)
11ax support	Working frequency	5.1GHz+5.8GHz+5GHz/2.4GHz
	802.11ax maximum speed of the whole machine	1.2Gbps+1.2Gbps+0.433Gbps/0.2Gbps
	MU-MIMO	support
	OFDMA	support
	TWT	support
	A-MPDU	support
	A-MSDU	support
	Maximum Similarity Demodulation (MLD)	support
	Maximum Combined Ratio Receive (MRC)	support
	Space Time Block Code (STBC)	support
	Low Density Parity Check Coding (LDPC)	support
WLAN Basics	Maximum number of access users per radio	512 (the maximum number of access users of the whole machine is 1280)
	Virtual AP (recommended to set at most 5 per radio in practical applications)	48
	open system/shared key authentication	support
	Broadcast Probe request response control	support
	WPA, WPA2, WPA3, Pre-RSNA User Hybrid Access	support
	RTS/CTS	support
	CTS-to-self	support
	Hide SSID	support
WLAN extension	STA related	Supports abnormal STA offline detection, STA aging, STA-based statistics and status query, etc.
	Access user limit	support
	Link Integrity Check	support
	Repeater mode	support
security strategy	encryption	Support 64/128-bit WEP, Dynamic WEP, TKIP, CCMP (recommended) encryption
		Supports multiple key update trigger conditions to dynamically update unicast/broadcast keys
	802.11i	support
	Certification	Support 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication, etc.
	User isolation	support: 1. Layer 2 isolation of wireless users 2. SSID-based wireless user isolation
	Forwarding security	Support packet filtering, MAC address filtering, broadcast storm suppression, etc.
	Wireless Endpoint Admission	Support/Wireless EAD
	SSID and VLAN binding	support
	Intelligent Wireless Service Awareness (wIAA)	support
	wIDS/wIPS	support
	Management Frame Protection (802.11w)	support
AAA	Radius Client	support
	Authentication server multi-domain configuration	support
	Backup Authentication Server	support
Layer 2 and Layer 3 functions	IP address settings	Support: Static IP address (FAT) or DHCP to obtain IP address (optional option 60)
	Native IPv6	support
	IPv6 Portal	support
	IPv6 SAVI	support
	ACL	Support (IPv4/IPv6)
	local forwarding	Support: local forwarding based on SSID+VLAN
	multicast	IGMP Snooping/MLD Snooping
service quality	802.11e	Support WMM
	priority	Support Ethernet port 802.1p identification and marking
		Support wireless priority to wired priority mapping
	QoS Policy Mapping	Support different SSID/VLAN mapping with different QoS policies
	Support L2~L4 packet filtering and flow classification functions	support
	CAR	support
	User Bandwidth Management	Available bandwidth can be allocated per STA, or all STAs can share the total bandwidth by SSID
	load balancing	Support: based on traffic, user, frequency band (dual frequency support)
	Spectrum Navigation	support
	Multicast enhancement	Support: Multicast to Unicast (IPv4/IPv6)
	CAC (Call Admission Control)	Support: based on number of users and based on channel utilization
	SVP Phone	support
green technology	Packet-by-Package Power Control (PPC)	support
	Green AP mode	support
	Dynamic MIMO power saving	support
	Enhanced Automatic Power Save Delivery (E-APSD)	support
	WMM Power Save	support
Management and maintenance	network management	Centralized management of wireless controllers
	Remote Probe Analysis	support

Solutions we can offer

We focus on the IDC data center field, have professional enterprise-level products, and provide complete planning and design solutions.

Main Application Scenarios:
SDS, VDI, CDN, virtualization, big data, database, cloud scenarios, AI inference, small businesses, OA, and web application.
 

 

 

Packaging & Shipping

Delivery time : 15-45 working days after payment receipt confirmed (based on actual quantity).

Original packaging to ensure product quality and safety.

Professional goods shipping forwarder.

After Sales Service

We guarantee that all products are original and authentic. All support after-sales inspection. Regarding xFusion server, we can provide remote technical services and troubleshooting.
In addition to new retail products. Others have used NEW BULK. We provide a complete test report. Please rest assured to buy. The stock is huge. Many products are not released in time. If you need more product quotations. You can email to contact us at any time. 

 

FAQ

Q1: How can I believe that your product is of good quality?
A1: We guarantee that all products are original products.We provide a complete test report.

Q2: When can I get a quote?
A2: We will usually quote you within 24 hours after receiving your inquiry. If you really want to get a quotation and more other questions, you can contact us via trademessage or email.

Q3: Why choose you?
Q3: As an Audited Supplier,we have a good reputation on our customers,because of the good quality,suitable price and good service.

Q4: What is your payment?
A4: T/T wire bank transfer.