Ewp-Wa6522h-Li-Fit WiFi Router High-Speed Ap Indoor Wireless Access Point Modem

• Work Mode: AP
• WiFi Antenna Type: Built-in
• Transmission Rate: >200Mbps
• Model NO.: EWP-WA6522H-LI-FIT
• Certification: FCC
• Transport Package: Carton
• Specification: 86mm× 86mm× 48.2mm
• Trademark: H3C
• Origin: China

Product Description

 

Product Introduction

H3C WA6522H-LI wireless product is a Wi-Fi 6 (802.11ax) AP product independently developed by New H3C Technology Co., Ltd. (H3C).It is suitable for various dense room places such as school dormitories, hospital wards, hotel rooms, etc., to solve the problem of poor signal quality in traditional AP deployment methods in these scenarios.
The whole machine adopts dual-band and four-stream design, and the maximum access rate is 2.975Gbps. 5GHz radio frequency 2 spatial streams, the maximum negotiation rate is 2.4Gbps, 2.4GHz radio frequency 2 spatial streams, the maximum negotiation rate is 0.575Gbps.
The standard 86*86 form Wi-Fi 6 product is integrated into the environment and cannot detect its existence.
The installation method is flexible, and supports various installation methods such as wall-mounted, ceiling-mounted and 86 boxes.
It comes with a pair of transparent transmission ports, which provides higher reliability for wired access and supports internal and external network isolation.

Detailed Photos

 

Operating mode

The built-in all-in-one version of the AP can flexibly switch the working mode version according to the needs, thereby saving the implementation cost and realizing out-of-the-box use.

Fit AP
This product supports Fit AP mode, which can be managed by the wireless controller equipped with Comware system. In this networking mode, batch AP localized management can be realized.

Cloud AP
This product supports the cloud-simple solution, which enables wireless networking without hardware AC and authentication server, and realizes rich authentication functions such as PPSK, PSK, Portal, SMS, and WeChat. At the same time, customized development is carried out for multi-branch scenarios such as chain hotels and supermarkets, and features such as simplified branch start-up, hierarchical and decentralized management, smart large-screen headquarters, and custom configuration templates are realized. Through cloud-simple intelligent operation and maintenance, you can fully grasp the status of wireless devices, networks, and terminals, and provide simplified management and operation and maintenance, reduce customer capital investment, liberate operation and maintenance and management manpower investment, and reduce costs and increase efficiency.

Anchor AC
This product supports Anchor AC mode, Anchor AC is a special mode designed to facilitate the management of APs in small wireless networks. Anchor AC has the following functions:
AC: When there is no AC device in the network, the AP works in Anchor AC mode, and can be used as an AC device in the network to manage other Fit APs.
AP: The radio interface provided by the AP can provide wireless access services for users.
That is, the Anchor AC role assumes both the AC and AP roles. Compared with the traditional networking of ACs and Fit APs, Anchor AC has a lower cost and is easy to deploy, making it more suitable for small wireless networking.
 

Intelligent operation and maintenance

The H3C wireless intelligent operation and maintenance system has the capabilities of data visualization, measurement, and automatic optimization, which reduces the difficulty of wireless operation and maintenance and saves labor costs.

data visualization
H3C wireless intelligent operation and maintenance system collects and displays rich operation and maintenance data through telemetry technology. For example, on the terminal side, it records the terminal's roaming log, authentication log, signal strength, important packet interaction log, packet loss, delay, etc., and can identify 150+ reasons for terminal failure to go online, 140+ reasons for terminal offline, and 100+ authentication failures reason. For example, on the AP side, collect data such as AP association failure reasons, reasons for leaving the AC, traffic composition of each wired port, error packet information, Radio traffic composition, Radio channel utilization, Radio interference strength, and WIPS wireless attacks.

state quantification
The H3C wireless intelligent operation and maintenance system has established a complete evaluation system for terminal experience, equipment health, and network health to measure terminal experience, equipment, and network operation, and facilitate management personnel to view and maintain the network.

Network intelligent optimization
A wireless network is a changing network. The air interface environment is changing, services are changing, and user scale is changing. This requires the network to have the ability to automatically solve problems and optimize the network. New H3C wireless intelligent operation and maintenance problems are solved intelligently, and the progressive optimization system has the ability to actively discover problems, analyze problems, and issue policies to automatically solve problems and optimize the network, so that the network is always in high performance, low interference, and the best user experience. In the best state, the whole process does not require manual participation.
 

Wired and wireless security protection

Terminal access and admission security
With the wireless controller, wireless switch, and authentication system independently developed by H3C, it can support authentication and encryption methods including 802.1x authentication, PSK authentication, MAC, PPPOE, Portal, WeChat, SMS, etc., to protect wireless network security.

Supports Wireless Intrusion Prevention System (WIPS)
Support WIPS, with the wireless controller/wireless switch, it can simultaneously support WIPS features such as Rogue detection, intrusion detection, blacklist and whitelist, and can detect, identify and counteract wireless illegal devices, and effectively block them.

Wired Security
Support AP wired access control, AP wired port can be used as 1X Client authentication to access wired network, so as to ensure the legality of access AP; at the same time, it can provide security for wireless tunnels through CAPWAP tunnel encryption and DTLS encryption methods.
Cooperating with H3C security situation awareness, security linkage can be realized. When the wired side detects that there is a security problem in the wireless terminal, the linkage mechanism will be triggered, and the wireless controller will be notified to block the wireless access of the terminal, thereby ensuring network security.
 

Air interface optimization and terminal access strategy

Supports the Radio Resource Optiomization Policy (RROP), which is a collection of multiple wireless air interface optimization methods, dedicated to reducing or controlling the impact of management packets, broadcast packets, and invalid packets on air interface media resources. consumption, and set aside more resources to provide users with better wireless application services. RROP mainly includes air interface optimization strategies such as the Layer 2 isolation function of wireless services, disabling the low rate, adjusting the beacon sending interval, and disabling the broadcast probe detection function.
Support terminal access control policy (SACP, Station Access Control Policy), terminal access control policy controls terminal access to better AP or wireless service by restricting, controlling, and guiding wireless terminal access; Control and schedule traffic, improve the overall performance of the entire wireless network, and improve the experience and effect of wireless access applications. SACP mainly includes terminal control policies such as prohibiting weak signal client access, spectrum navigation, roaming navigation, load sharing, ignoring weak signal strength packets, fair scheduling sent by air interface, traffic shaping based on client link status, and intelligent bandwidth guarantee. .

RF resource management

Radio Resource Management (RRM), through systematic and intelligent radio management, monitors air interface channel utilization, channel interference, signal conflicts and other environmental problems in real time, and adjusts radio frequency parameters such as working channel, bandwidth, and power in a timely manner to maintain the most optimal performance. optimal radio resource status. It can realize automatic network layout and automatic network repair.
 

Application Assurance

Through the unique Wi-Fi 6 eXtreme Plus technology, H3C can intelligently identify the user's application on the AP, and save the snapshot of the identified application. The user's subsequent packets will be compared with the snapshot, combined with intelligent sorting The technology can process the identified application packets at high speed, overcoming the low performance of traditional DPI and the inaccuracy of DFI identification applications. When the AP detects that the user is using key services, the AP will perform targeted optimization on roaming and radio switching behaviors, so that users can always maintain a smooth experience when using key services. When it is found that the high air interface occupancy affects the user experience of audio and video services, APs jointly mobilize the traffic of key services and reserve air interface resources for key services, thus achieving the effect of two-way application acceleration.
 

Support roaming optimization

The wireless AP fully supports the Fast BSS Transition function defined in the 802.11r standard, which can speed up the roaming process of wireless users, reduce the probability of connection interruption and improve the quality of roaming service.
Through the 802.11k protocol mechanism, the AP and the wireless client perform mutual detection and multi-dimensional mutual awareness of the network topology; the AC identifies and calculates the roaming timing and roaming access location of the wireless client from a full perspective, and communicates with the client through the 802.11v and 802.11r mechanisms. Perform negotiation and handover; at the same time, during the handover, the AC maintains the traffic of the downlink service traffic, so as to achieve seamless handover and improve the user experience.

Only 11ax access

Supports Only 11ax access function. Since Wi-Fi 6 (802.11ax) is backward compatible with 802.11a/b/g/n/ac protocols, under normal circumstances, 802.11a/b/g/n/ac users can also access into a Wi-Fi 6 (802.11ax) wireless access device. However, the provision of this compatibility will cause the actual performance of users with high access capabilities such as Wi-Fi 6 (802.11ax) to decline to a certain extent. H3C equipment supports setting a certain radio frequency of the wireless access equipment to the Only 11ax access mode, and only Wi-Fi 6 (802.11ax) users can access, so that the bandwidth and performance are guaranteed.
 

Support probe scanning

The product can be used as a Sensor device for remote probe analysis. It has an independent scanning radio frequency. It does not affect the normal access of the AP. It can monitor and capture the full-band Wi-Fi packets in the coverage area and mirror them to the local analysis in real time. The device is used by network administrators for troubleshooting and optimization analysis. The remote probe analysis function can not only perform wireless packet mirroring for working channels, but also poll and sample all channels to flexibly meet the requirements of wireless network monitoring and operation and maintenance.
The product can simulate the wireless terminal and cooperate with the intelligent operation and maintenance platform to analyze and troubleshoot the wireless air interface fault, that is, the Doctor AP mode. In this mode, the AP will simulate terminal behavior, collect wireless network information, and synchronize it to the intelligent operation and maintenance platform for accurate diagnosis. Cooperate with Cloudnet APP and Yunjian to realize the three-dimensional analysis of the cloud network and accurately locate wireless network problems.
 

Support OFDMA technology

Supporting OFDMA (Orthogonal Frequency Division Multiple Access, Orthogonal Frequency Division Multiple Access) technology, the AP can subdivide the wireless bandwidth and use different subcarriers to transmit data to multiple terminals at the same time, reducing multi-user air interface resource conflicts in traditional protocols It can improve the user experience of low-latency applications such as voice and video in multi-user scenarios.
 

Support spatial multiplexing technology

Support SR (Spatial Reuse, spatial multiplexing) technology & BSS Coloring coloring mechanism, control the terminal to adjust the transmit power by identifying the packet color at the link layer, improve the channel multiplexing capability in high-density deployment, and alleviate co-channel interference during multi-user use problem, greatly improving the utilization of spectrum resources.

Support TWT technology

Support TWT (Target Wake Times, target wake-up time) technology, allowing the AP to make unified scheduling for the wake-up and sleep of the terminal, which can not only reduce the conflict between terminals, but also reduce the unnecessary wake-up times of the terminal to achieve the purpose of energy saving.
 

Flexible forwarding strategy

When connecting via WAN, the wireless access device is deployed in the branch office, and the wireless controller is deployed in the headquarters. The traditional forwarding mode is that data packets are sent by the wireless access device to the wireless controller, and then the wireless controller performs centralized forwarding. . The product can directly convert data packets into wired format packets on wireless access devices, so that data packets are forwarded locally without passing through the wireless controller, which greatly saves wired bandwidth. At the same time, it also supports flexible policy forwarding. With the terminals in the wireless service, traffic concentration and local forwarding selection can be realized according to the forwarding policy, thereby releasing the pressure of export bandwidth and reducing the cost of network bandwidth.
 

Support IPv4/IPv6 dual protocol stack (Native IPv6)

Fully supports IPv6 features, and the device implements IPv4/IPv6 dual protocol stacks. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register on the wireless controller and provide WLAN services through broadcast, multicast, DHCP option43, DNS, etc., without becoming an information island in the network.
 

Provide EAD wireless access

The EAD (End user Admission Domination, terminal admission control) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces enterprise security policies for user terminals accessing the network. Through the linkage with the security policy server, unqualified wireless clients that are infected with viruses or have system vulnerabilities can be processed in various ways, such as offline, isolation, reminder or monitoring, and only after the wireless clients comply with the corresponding security policies Allows normal access to the network, thereby improving the overall security of the wireless network.
 

Support Chinese SSID

Supports the use of Chinese SSIDs, and can specify SSIDs with a maximum of 16 Chinese characters, and can also use mixed Chinese and English SSIDs, providing greater convenience for domestic users.
 

 

Product Parameters

 

Hardware Specifications

 

Attributes	WA6522H-LI
Dimensions (without mounting accessories)	86mm×86mm×48.2mm
Fixed interface	2 10/100/1000Mbps auto-negotiation Ethernet downstream ports 1 10/100/1000Mbps auto-negotiation Ethernet uplink port 1 pair of Pass Through ports
PoE	802.3af powered
Built-in antenna	Built-in smart antenna system
Built-in IoT	Built-in BLE5.1
Working frequency	802.11ax/ac/n/a: 5.725GHz-5.850GHz (China); 5.47GHz~5.725GHz; 5.15GHz~5.35GHz (China) 802.11ax/b/g/n: 2.4GHz-2.483GHz (China)
Modulation technology	OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, [email protected]/11Mbps MIMO-OFDM(11n): MCS 0-15 MIMO-OFDM(11ac): MCS 0-9 MIMO-OFDM(11ax): MCS 0-11
Modulation	11b: DSS:[email protected]/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
Transmit power (combined)	21dBm (Actual transmit power will vary according to national regulations)
Adjustable power granularity	1dBm
reset/restore factory configuration	support
Status Indicator	Blink alternate flashing mode, yellow, green and blue flashing mode in different working states, terminal access breathing flashing mode
Operating temperature/Storage temperature	-10ºC~50ºC/-40ºC~70ºC
Working Humidity/Storage Humidity	5%~95% (non-condensing)
Power consumption	≤12.95W
safety regulations	GB4943, EN/IEC/UL 60950-1, EN/IEC/UL 62368-1
EMC	EN 55024, EN 55032, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000 -4-6, EN 61000-4-8, EN 61000-4-11, EN60601-1-2, EN301 489-1, EN301 489-17
surroundings	GB/T 2423, GB/T 13543, GB 4208
RF Certification	FCC Part 15, EN 300 328, EN 301 893, Type Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology
MTBF	>850000H

 

Software Specifications

Attributes		WA6522H-LI
Product Positioning		Indoor panel type (5GHz 2*2 MIMO+2.4GHz 2*2 MIMO)
Operating mode	Fit	Control management through AC
	Cloud (Fat)	It can be managed by the cloud simplified network, and can also work independently
	Anchor AC	Manage fit APs in AC mode
	Mode switch	The mode can be switched through the command line, AC, Yunjian network, Reset button, etc.
11ax support	The highest speed of Wi-Fi 6 (802.11ax) of the whole machine	2.4Gbps +0.575Gbps
	TWT	support
	BSS Color	support
	MU-MIMO	support
	OFDMA	support
	Only 11ax	support
WLAN Basics	Working frequency	5GHz+2.4GHz
	A-MPDU	support
	A-MSDU	support
	Maximum Similarity Demodulation (MLD)	support
	Maximum Combined Ratio Reception (MRC)	support
	Space Time Block Code (STBC)	support
	Low Density Parity Check Coding (LDPC)	support
WLAN extension	STA management	Supports abnormal STA offline detection, STA aging, STA-based statistics and status query, etc.
	Access user limit	support
	Link Integrity Check	support
	Broadcast Probe request response control	support
	Disable weak signal client access	support
	Hide SSID	support
	wlan rrm	support
	wireless bridge	support
	Repeater mode	support
	Client mode	Cloud mode support
	Doctor AP	Fit mode support
	Remote AP	Fit mode support
	11k	support
	11v	Fit mode support
	11r	Fit mode support
security strategy	encryption	Support 64/128-bit WEP, TKIP, CCMP, WPA3, WAPI encryption
		Supports multiple key update trigger conditions to dynamically update unicast/broadcast keys
	802.11i	support
	Certification	Support 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication, etc.; open system/shared key authentication; Enhanced Open system authentication WPA, WPA2, WPA3, Pre-RSNA User Hybrid Access
	User isolation	Supports Layer 2 isolation of wireless users Support SSID-based wireless user isolation
	Forwarding security	Support packet filtering, MAC address filtering, broadcast storm suppression, etc.
	Wireless Endpoint Admission	Support wireless EAD
	SSID and VLAN binding	support
	Intelligent Wireless Service Awareness (wIAA)	support
	wIDS/wIPS	support
	Management Frame Protection (802.11w)	support
	802.1X Client	support
AAA	Radius Client	support
	Authentication server multi-domain configuration	support
	Backup Authentication Server	support
Layer 2 and Layer 3 functions	IP address settings	Support: static IP address or DHCP to obtain IP address (optional option 60)
	Native IPv6	support
	IPv6 Portal	support
	IPv6 SAVI	support
	ACL	Support (IPv4/IPv6)
	NAT	support
	PPPoE Client	support
	local forwarding	Fit mode support: local forwarding based on SSID+VLAN
	multicast	IGMP Snooping/MLD Snooping
service quality	802.11e	Support WMM
	priority	Support Ethernet port 802.1p identification and marking
		Support wireless priority to wired priority mapping
	QoS Policy Mapping	Support different SSID/VLAN mapping with different QoS policies
	Support L2~L4 packet filtering and flow classification functions	support
	CAR	support
	User Bandwidth Management	Allocate available bandwidth per STA Allocate the total bandwidth shared by all STAs by SSID Dynamically adjust the available bandwidth of the STA according to the service
	load balancing	Supports flow-based load balancing Support user-based load balancing Dual 5G devices support frequency band-based load balancing
	Spectrum Navigation	support
	Multicast enhancement	Support: Multicast to Unicast (IPv4/IPv6)
	CAC (Call Admission Control)	Support: based on number of users and based on channel utilization
	App identification	Fit mode supports audio and video optimization (eMDI/SQA/UCC)
	Time Fair Scheduling (ATF)	support
green technology	Green AP mode	support
	Dynamic MIMO power saving	support
	U-APSD	support
	SM Power Save	support
Management and maintenance	AC centralized management	Fit mode: support Cloud mode: support version upgrade, switch mode
	Simple cloud management	Cloud mode support
	local web	Cloud/Anchor AC mode support
	telnet	Cloud/Anchor AC mode support
	ssh	Cloud/Anchor AC mode support
	snmp	Cloud/Anchor AC mode support
	Debug serial port	support
	Intelligent operation and maintenance	Fit/Cloud mode support

*Note: The option "supported" listed in the software specification table means that all modes of the AP are supported
 

 

Solutions we can offer

We focus on the IDC data center field, have professional enterprise-level products, and provide complete planning and design solutions.


 

 

 

Packaging & Shipping

Delivery time : 15-45 working days after payment receipt confirmed (based on actual quantity).

Original packaging to ensure product quality and safety.

Professional goods shipping forwarder.

After Sales Service

We guarantee that all products are original and authentic. All support after-sales inspection. Regarding xFusion server, we can provide remote technical services and troubleshooting.
In addition to new retail products. Others have used NEW BULK. We provide a complete test report. Please rest assured to buy. The stock is huge. Many products are not released in time. If you need more product quotations. You can email to contact us at any time. 

 

FAQ

Q1: How can I believe that your product is of good quality?
A1: We guarantee that all products are original products.We provide a complete test report.

Q2: When can I get a quote?
A2: We will usually quote you within 24 hours after receiving your inquiry. If you really want to get a quotation and more other questions, you can contact us via trademessage or email.

Q3: Why choose you?
Q3: As an Audited Supplier,we have a good reputation on our customers,because of the good quality,suitable price and good service.

Q4: What is your payment?
A4: T/T wire bank transfer.