Ewp-Wak522X-Fit WiFi Router Industrial-Grade Intelligent High-Power Ap Wireless Base Station Access Point Modem

• Work Mode: AP
• WiFi Antenna Type: Built-in
• Transmission Rate: >200Mbps
• Certification: FCC
• Transport Package: Carton
• Specification: 250x250x79.5mm
• Model NO.: EWP-WAK522X-FIT
• Trademark: H3C
• Origin: China

Product Description

 

Product Introduction

 

H3C WA522X series wireless products are ultra-gigabit industrial-grade intelligent high-power 802.11ac wave2 wireless base station access equipment (hereinafter referred to as AP) independently developed by New H3C Technology Co., Ltd. (H3C) for the SMB market of small and medium-sized enterprises. Four-stream frequency, the access rate of the whole machine is 1267Mbps, of which the 5G radio frequency rate is ≥867Mbps, and the 2.4G rate is ≥400Mbps, which can provide a wireless access rate that is more than three times that of the traditional 802.11n network. The uplink of this series of wireless products adopts Gigabit Ethernet interface, which breaks through the limit of 100M speed and makes wireless multimedia applications a reality.
WAK522X series products have built-in integrated intelligent radio frequency coverage optimization technology. The maximum transmit power of a single radio frequency can reach 500mW, which can effectively solve various outdoor WLAN coverage problems and improve the accuracy and stability of WLAN outdoor coverage. At the same time, through the professional integrated outdoor design, it has the ability to work in a wide range and wide temperature, which is very convenient for outdoor installation and debugging. It is widely used in professional intelligent coverage of various WLAN outdoor scenarios including wireless cities, wireless communities, and scenic spots.
 

Realize intelligent gigabit cloud access and high-quality wireless network TCO

WAK522X series AP complies with 802.11ac wave2 protocol standard, adopts professional modular design, can provide 1267Mbps access capability of the whole machine, and the actual user performance is about 3 times that of 802.11n products in the same environment. Through the built-in integrated intelligent radio frequency coverage optimization technology, it can effectively provide higher-performance mobile cloud access services in terms of coverage, access density, and operation stability, and assist users to achieve high-quality wireless network TCO (Total Cost of Ownership/Total Cost of Ownership).
WAK522X series AP adopts professional integrated outdoor design, with wide-ranging and wide temperature working ability, which is very convenient for outdoor installation and debugging. It is widely used in wireless cities, wireless communities, wireless villages, and 3G+W co-location Professional intelligent macro coverage for WLAN-like outdoor scenarios.
 

Support Gigabit SFP optical interface

When the outdoor AP is in use, there may be situations where the network cable length of 100M cannot be satisfied, while the WAK522X series AP supports gigabit SFP optical interface, which can be directly connected to the AP by optical fiber, reducing the possible failure points of equipment such as optical cats. .

Support Fat/Fit two modes

WAK522X series AP supports two working modes: Fat and Fit. According to the needs of network planning, it can flexibly switch between the two working modes of Fat and Fit. At the same time, users can flexibly select the desired device factory version (Fat mode) according to application requirements. version or Fit mode version).
When the customer's wireless network is initially small, the customer only needs to purchase the WAK522X series AP wireless device and set its working mode to Fat mode. With the continuous expansion of the customer's network scale, when the number of wireless devices used in the network reaches dozens or even hundreds, in order to reduce the complexity of network management, it is recommended that customers purchase the WX series wireless controller equipment independently developed by H3C, which is convenient for centralized management. All wireless devices in the network only need to switch their working mode to Fit mode.
The working mode switching process only requires a simple command line, and can be executed in batches through the device network management, which is conducive to the smooth upgrade of the customer's wireless network from a small network to a large network, so as to better protect the user's investment, and is very suitable for carrier-class large-scale wireless networks. Smooth expansion and upgrade of the network.

Provide local forwarding function

When WAK522X series AP (Fit mode) is forwarded through WAN, the wireless access device is deployed in the branch, and the wireless controller is deployed in the headquarters, all user data is sent by the wireless access device to the wireless controller, and then by the wireless controller Centralized forwarding results in low forwarding efficiency. WAK522X series APs can directly convert data packets into wired format packets on the wireless access device, so that data packets are forwarded locally without passing through the wireless controller, which greatly improves the forwarding efficiency.

Support IPv4/IPv6 dual protocol stack (Native IPv6)

WAK522X series APs fully support IPv6 features, and the device implements IPv4/IPv6 dual protocol stacks. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register with the WX series controller to provide WLAN services without becoming an information island in the network.

Provide EAD wireless access

The End User Admission Domination (EAD) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces enterprise security policies for user terminals accessing the network. Linked with the security policy server, unqualified wireless clients that are infected with viruses or have system vulnerabilities can be processed in various ways, such as offline, isolation, reminder or monitoring. Only wireless clients are allowed to comply with the corresponding security policies Access the network normally, thereby improving the overall security of the wireless network.

Support remote probe analysis

WAK522X series APs support as a Sensor device for remote probe analysis, which can intercept and capture Wi-Fi packets in the coverage area and mirror them to the local analysis device in real time for network administrators to troubleshoot and optimize analysis. The remote probe analysis function can perform non-convergence mirroring for the working channel, or poll and sample all channels, flexibly meeting the wireless network monitoring operation and maintenance requirements.
 

Built-in RF Optimization Engine (ROE)

WAK522X series APs have a built-in RF Optimizing Engine, which can effectively improve the application acceleration capability and quality assurance effect in scenarios such as high-density access and streaming media transmission in wireless deployment through RF optimization based on features and protocols. These include: multi-user fair scheduling, hybrid access fairness, filtering interference, better rate, spectrum navigation, multicast enhancement (IPv4/IPv6), packet-by-packet power control, and intelligent bandwidth guarantee.

Support intelligent load balancing

WAK522X series AP supports complex balancing method according to the number of access users and traffic. When the wireless controller finds that the load of the wireless access device exceeds the set threshold, the wireless controller will automatically calculate the user for the new access user. Whether there are any lightly loaded wireless access devices around for the user to access, if so, the user's association request will be rejected, and the user will switch to other lightly loaded wireless access devices, but if the wireless users are not overlapping In the coverage area, traditional load balancing methods often lead to failure to connect to the network, resulting in false balancing. H3C's innovative support for intelligent load balancing technology ensures that the load balancing function is only activated for wireless users in overlapping coverage areas, effectively avoiding the occurrence of false balancing, thus maximizing the wireless network capacity.

Support Chinese SSID

WAK522X series APs support the use of Chinese SSIDs, which can specify SSIDs with a maximum of 16 Chinese characters, and can also use mixed Chinese and English SSIDs, providing greater convenience for domestic users.

Fully support intelligent wired and wireless integrated management

All H3C series wireless products can implement WSM-based wired and wireless integrated management through open network management protocols.
WSM is a wireless operation management component developed by H3C on the basis of the next-generation business software platform iMC (intelligence Management Center/Intelligent Management Center). The scalability can meet the evolving needs of customer network management. The Web-based management system provides a simple and friendly management platform for wireless business managers. In cooperation with the iMC intelligent management platform and other components, it can also realize the panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions of wireless devices, and can unify other devices in the network. management, and truly realize intelligent wired and wireless integrated management.

Product Parameters

Hardware Specifications

 

Attributes	WAK522X
weight	1.8Kg
Dimensions (excluding antenna interface and accessories)	250x250x79.5mm
10/100/1000M Ethernet port	1
1000M SFP optical interface	1
Console port	1
IoT interface	1 (Maximum support 10 RFID, ZigBee, BLE module expansion)
antenna	Built-in directional antenna
Working frequency	802.11ac/n/a : 5.725GHz-5.850GHz ; 5.15~5.35GHz (China) 802.11b/g/n : 2.4GHz-2.483GHz (China)
Modulation technology	OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, [email protected]/11Mbps MIMO-OFDM (11n): MCS 0-15 MIMO-OFDM (11ac): MCS 0-9
Transmit power (max)	27dBm
Adjustable power granularity	1dBm
Operating temperature/Storage temperature	-40ºC~65ºC/ -40ºC~85ºC
Working Humidity/Storage Humidity	0%~100% (non-condensing)
Power consumption	≤35W	≤47W (including IoT power supply)
safety regulations	GB4943, EN60601-1-2 (medical), UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22
EMC	GB9254-2008, EN301 489, EN55022, FCC Part 15
RF Certification	FCC Part 15, EN 300 328, EN 301 893, Type Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology
Health	FCC Bulletin OET-65C, EN 50385, IC Safety Code 6
MTBF	>250000H

 

Software Specifications

Attributes		WAK522X
Product Positioning		Industrial grade dual frequency
11ac support	number of spatial streams	2
	Working frequency	5GHz
	80MHz bundle	support
	867Mbps (PHY)	support
	MU-MIMO	support
	A-MPDU	support
	A-MSDU	support
	Maximum Similarity Demodulation (MLD)	support
	Maximum Combined Ratio Receive (MRC)	support
	Space Time Block Code (STBC)	support
	Low Density Parity Check Coding (LDPC)	support
11n support	number of spatial streams	2+2
	Working frequency	2.4GHz and 5GHz
	40MHz bundle	Support (2.4GHz not recommended)
	400Mbps (PHY)	support
	A-MPDU	support
	Maximum Similarity Demodulation (MLD)	support
	Switching Beamforming (TxBF)	support
	Maximum Combined Ratio Receive (MRC)	support
	Space Time Block Code (STBC)	support
	Low Density Parity Check Coding (LDPC)	support
WLAN Basics	Maximum number of access users per radio	256
	Virtual AP (recommended to set at most 5 per radio in practical applications)	32
	open system/shared key authentication	support
	Broadcast Probe request response control	support
	WPA, WPA2, Pre-RSNA user hybrid access	support
	RTS/CTS	support
	CTS-to-self	support
	Hide SSID	support
	STA related	Supports abnormal STA offline detection, STA aging, STA-based statistics and status query, etc.
WLAN extension	Access user limit	support
	Link Integrity Check	support
	Repeater mode	support
security strategy	encryption	Support 64/128-bit WEP, dynamic WEP, TKIP, CCMP (11n recommended) encryption
	encryption 802.11i	Supports multiple key update trigger conditions to dynamically update unicast/broadcast keys
		support
	Certification	Support 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication, etc.
	User isolation	support: 1. Layer 2 isolation of wireless users 2. SSID-based wireless user isolation
	Forwarding security	Support packet filtering, MAC address filtering, broadcast storm suppression, etc.
	Wireless Endpoint Admission	Support/Wireless EAD
	SSID and VLAN binding	support
	Intelligent Wireless Service Awareness (wIAA)	support
	wIDS/wIPS	support
	Management Frame Protection (802.11w)	support
	Real Time Spectrum Guard (RTSG)	support
AAA	Radius Client	support
	Authentication server multi-domain configuration	support
	Backup Authentication Server	support
Layer 2 and Layer 3 functions	IP address settings	Support: DHCP to obtain IP address (optional option 60)
	Native IPv6	support
	IPv6 Portal	support
	IPv6 SAVI	support
	ACL	Support (IPv4/IPv6)
	local forwarding	Support: local forwarding based on SSID+VLAN
	multicast	IGMP Snooping/MLD Snooping
	802.11e	Support WMM
service quality	priority	Support Ethernet port 802.1p identification and marking
	priority QoS Policy Mapping	Support wireless priority to wired priority mapping
		Support different SSID/VLAN mapping with different QoS policies
	Support L2~L4 packet filtering and flow classification functions	support
	CAR	support
	User Bandwidth Management	Available bandwidth can be allocated per STA, or all STAs can share the total bandwidth by SSID
	load balancing	Support: based on traffic, user, frequency band (dual frequency support)
	Spectrum Navigation	support
	Multicast enhancement	Support: Multicast to Unicast (IPv4/IPv6)
	CAC (Call Admission Control)	Support: based on number of users and based on channel utilization
	SVP Phone	support
	Packet-by-Package Power Control (PPC)	support
green technology	Green AP mode	support
	Dynamic MIMO power saving	support
	Enhanced Automatic Power Save Delivery (E-APSD)	support
	WMM Power Save	support
Management and maintenance	Manage SSIDs	support
	log function	SYSLOG
	Remote Probe Analysis	support

 

Solutions we can offer

We focus on the IDC data center field, have professional enterprise-level products, and provide complete planning and design solutions.

Main Application Scenarios:
SDS, VDI, CDN, virtualization, big data, database, cloud scenarios, AI inference, small businesses, OA, and web application.
 

 

 

Packaging & Shipping

Delivery time : 15-45 working days after payment receipt confirmed (based on actual quantity).

Original packaging to ensure product quality and safety.

Professional goods shipping forwarder.

After Sales Service

We guarantee that all products are original and authentic. All support after-sales inspection. Regarding xFusion server, we can provide remote technical services and troubleshooting.
In addition to new retail products. Others have used NEW BULK. We provide a complete test report. Please rest assured to buy. The stock is huge. Many products are not released in time. If you need more product quotations. You can email to contact us at any time. 

 

FAQ

Q1: How can I believe that your product is of good quality?
A1: We guarantee that all products are original products.We provide a complete test report.

Q2: When can I get a quote?
A2: We will usually quote you within 24 hours after receiving your inquiry. If you really want to get a quotation and more other questions, you can contact us via trademessage or email.

Q3: Why choose you?
Q3: As an Audited Supplier,we have a good reputation on our customers,because of the good quality,suitable price and good service.

Q4: What is your payment?
A4: T/T wire bank transfer.