Type: | Ethernet Switch |
---|---|
Ports: | 54 |
Exchange Capacity: | 432gbps/4.32tbps |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
project | S5500V3-28S-SI | S5500V3-54S-SI | S5500V3-28PS-SI | S5500V3-54PS-SI | S5500V3-36F-SI | S5500V3-28S-DP-SI | S5500V3-54S-DP-SI | S5500V3-36F-DP-SI | S5500V3-54F-DP-SI |
exchange capacity | 432Gbps/4.32Tbps | ||||||||
packet forwarding rate | 166Mpps | ||||||||
Service port description | 24 10/100/1000Base-T adaptive Ethernet ports, 4 10G SFP+ ports | 48 10/100/1000Base-T adaptive Ethernet ports, 6 10G SFP+ ports | 24 10/100/1000Base-T adaptive Ethernet ports, 2 Gigabit SFP ports, 2 10 Gigabit SFP+ ports | 48 10/100/1000Base-T adaptive Ethernet ports, 4 Gigabit SFP ports, 2 10 Gigabit SFP+ ports | 24 Gigabit SFP ports, 8 10/100/1000Base-T adaptive Ethernet ports, 4 10 Gigabit SFP+ ports | 24 10/100/1000Base-T adaptive Ethernet ports, 4 10G SFP+ ports | 48 10/100/1000Base-T adaptive Ethernet ports, 6 10G SFP+ ports | 24 Gigabit SFP ports, 8 10/100/1000Base-T adaptive Ethernet ports 4 10G SFP+ ports |
48 Gigabit SFP ports, 6 10 Gigabit SFP+ ports, 1 10/100/1000Base-T out-of-band management port |
Dimensions (width × height × depth, unit: mm) | 440×160×43.6 | 440×260×43.6 | 440×160×43.6 | 440×260×43.6 | 440×260×43.6 | 440×360×43.6 | 440×360×43.6 | 440×360×43.6 | 440×360×43.6 |
weight | ≤2.2kg | ≤4.0kg | ≤2.2kg | ≤4.0kg | ≤3.5kg | ≤5.6kg | ≤6.0kg | ≤4.5kg | ≤4.5kg |
CONSOLE port | 1 | ||||||||
Input voltage | AC • Rated voltage range: 100V~240V AC, 50/60Hz • Maximum voltage range: 90V~264V AC, 47~63Hz |
||||||||
Power consumption (static) | Single AC: 17W | Single AC: 19W | Single AC: 17W | Single AC: 19W | Single AC: 27W | Single AC: 16W Single DC: 22W Dual AC: 18W Dual DC: 27W |
Single AC: 18W Single DC: 23W Dual AC: 23W Dual DC: 29W |
Single AC: 29W Single DC: 30W Dual AC: 35W Dual DC: 35W |
Single AC: 36W Single DC: 38W Dual AC: 43W Dual DC: 43W |
Power consumption (at full load) | Single AC: 37W | Single AC: 53W | Single AC: 37W | Single AC: 53W | Single AC: 54W | Single AC: 37W Single DC: 41W Dual AC: 39W Dual DC: 45W |
Single AC: 55W Single DC: 56W Dual AC: 57W Dual DC: 61W |
Single AC: 52W Single DC: 54W Dual AC: 58W Dual DC: 60W |
Single AC: 77W Single DC: 77W Dual AC: 80W Dual DC: 84W |
Working temperature | -5ºC~45ºC | ||||||||
Relative humidity of working environment (non-condensing) |
5%~95% |
characteristic | Feature description |
port aggregation | Support GE port aggregation |
Support 10GE port aggregation | |
Support static aggregation | |
Support dynamic aggregation | |
Support cross-device aggregation | |
Port Characteristics | Support IEEE802.3x flow control (full duplex) |
Supports storm suppression based on port rate percentage | |
Supports PPS-based storm suppression | |
Support bps-based storm suppression | |
Jumbo Frame | support |
MAC address table | Supports 32k MAC addresses |
Support black hole MAC address | |
Supports setting the maximum number of port MAC addresses to learn | |
VLAN | Port-based VLAN support |
Supports MAC-based VLANs | |
Protocol-based VLAN | |
IP subnet based VLAN | |
Support QinQ, flexible QinQ | |
Support VLAN Mapping | |
Support Voice VLAN | |
MVRP support | |
Layer 2 Ring Network Protocol | Support STP/RSTP/MSTP, PVST |
Support SmartLink | |
Support RRPP | |
Support ERPS Ethernet ring protection protocol (G.8032) | |
DHCP | DHCP Client |
DHCP Snooping | |
DHCP Relay | |
DHCP Server | |
DHCP Snooping option82/DHCP Relay option82 | |
IRF2 | Support IRF2 Intelligent Resilience Architecture |
Smart Resilient Architecture | Support distributed device management, distributed link aggregation, distributed elastic routing |
Supports stacking via standard Ethernet interfaces, etc. | |
Supports local stacking and remote stacking | |
IP routing | Support static routing |
Support RIPv1/v2, RIPng | |
Support OSPFv1/v2, OSPFv3 | |
Support BGP4, BGP4+ for IPv6 | |
IS-IS support | |
Support VRRP/VRRPv3 | |
IPv6 | Support ND (Neighbor Discovery) |
Support PMTU | |
Support IPv6-Ping, IPv6-Tracert, IPv6-Telnet, IPv6-TFTP | |
Support manual configuration of Tunnel | |
multicast | Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 |
Support PIM Snooping | |
Support MLD Proxy | |
Support multicast VLAN | |
Support IGMP v1/v2/v3, MLD v1/v2 | |
Support PIM-DM, PIM-SM, PIM-SSM | |
Support MSDP, MSDP for IPv6 | |
Support MBGP, MBGP for Ipv6 | |
mirror | Stream mirroring supported |
Supports local and remote port mirroring | |
OAM | 802.1ag support |
Support 802.3ah | |
Support ACL\QoS | Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function, provide based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, Traffic Classification for VLANs |
Support Time Range ACL | |
Supports bidirectional ACL policies in inbound and outbound directions | |
Supports issuing ACLs based on VLANs | |
Support to limit the rate of receiving packets and the rate of sending packets, the minimum granularity is 16Kbps | |
Support message redirection | |
Supports 802.1p and DSCP priority re-marking of packets | |
Support CAR (Committed Access Rate) function | |
Each port supports 8 output queues, and the CPU port supports 48 queues | |
Supports flexible queue scheduling algorithm, which can be set based on ports and queues at the same time, and supports four modes: SP, WRR, WFQ, SP+WRR | |
WRED support | |
safety features | Support user hierarchical management and password protection |
Support 802.1X authentication/centralized MAC address authentication | |
Support Guest VLAN | |
Support RADIUS authentication | |
SSH 2.0 support | |
Support port isolation | |
Support port security | |
Support PORTAL authentication | |
Support EAD | |
Supports DHCP Snooping to prevent spoofed DHCP servers | |
Support dynamic ARP inspection to prevent man-in-the-middle attacks and ARP denial of service | |
Support BPDU guard, Root guard | |
Support uRPF (Unicast Reverse Path Detection) to prevent IP source address spoofing and prevent viruses and attacks | |
Support IP/Port/MAC binding function | |
Support plaintext and MD5 ciphertext authentication of OSPF and RIPv2 packets | |
Support PKI (Public Key Infrastructure, public key infrastructure) | |
management and maintenance | Support XModem/FTP/TFTP loading and upgrading |
Support command line interface (CLI), Telnet, Console port for configuration | |
Support SNMPv1/v2/v3, WEB network management | |
Supports RMON (Remote Monitoring) alarms, events, and historical records | |
Support iMC intelligent management center | |
Support system log, hierarchical alarm, debug information output | |
NTP support | |
Support power alarm function, fan, temperature alarm | |
Support Ping, Tracert | |
Support VCT (Virtual Cable Test) cable detection function | |
Support DLDP (Device Link Detection Protocol) unidirectional link detection protocol | |
LLDP support | |
Support Loopback-detection port loopback detection | |
green technology | Support EEE(802.3az) |
Port automatic power down function | |
Port scheduled down function (Schedule job) |
We focus on the IDC data center field, have professional enterprise-level products, and provide complete planning and design solutions.
Main Application Scenarios:
Only applies to servers.
Delivery time : 15-20 working days after payment receipt confirmed (based on actual quantity). |
Original packaging to ensure product quality and safety. |
Professional goods shipping forwarder. |
We guarantee that all products are original and authentic. All support after-sales inspection. Regarding xFusion server, we can provide remote technical services and troubleshooting. In addition to new retail products. Others have used NEW BULK. We provide a complete test report. Please rest assured to buy. The stock is huge. Many products are not released in time. If you need more product quotations. You can email to contact us at any time. |
||||
Q1: How can I believe that your product is of good quality?
A1: We guarantee that all products are original products.We provide a complete test report.
Q2: When can I get a quote?
A2: We will usually quote you within 24 hours after receiving your inquiry. If you really want to get a quotation and more other questions, you can contact us via trademessage or email.
Q3: Why choose you?
Q3: As an Audited Supplier,we have a good reputation on our customers,because of the good quality,suitable price and good service.
Q4: What is your payment?
A4: T/T wire bank transfer.