Wa6322h WiFi Router High-Speed Ap Wireless Access Point Modem

• Type: WiFi Module
• Work Mode: AP
• WiFi Antenna Type: Built-in
• Transmission Rate: >200Mbps
• Certification: FCC
• Transport Package: Carton
• Model NO.: EWP-WA6322H-LI-FIT
• Specification: 86 mm *86 mm *40 mm
• Trademark: H3C
• Origin: China

Product Description

Detailed Photos

Product Description

WA6322H wireless product is a new generation of 802.11ax AP product independently developed by New H3C Technology Co., Ltd. (H3C).The whole machine adopts dual-frequency four-stream design. The industry's first 802.11ax product with a standard 86*86 form, preferably ultra-thin, so that it cannot be detected in the environment.
WA6322H supports various installation methods such as 86 boxes, wall-mounted, ceiling-mounted, and spotlights. It is suitable for various dense rooms such as school dormitories, hospital wards, and hotel rooms. It solves the problem of poor signal quality in traditional AP deployment methods in these scenarios.

Industry-leading next-generation 802.11ax technology design

H3C WA6322H product adopts the industry's excellent new generation 802.11ax technology design, dual-band 4-stream design, and the access rate of the whole machine can reach up to 1.775Gbps. 802.11ax 5GHz band supports 2 spatial streams, the maximum negotiation rate is 1.2Gbps, and the 2.4GHz band supports 802.11ax, 2 spatial streams, and the maximum negotiation rate is 0.575Gbps. Meet the terminal and application requirements of future occupancy scenarios.

Realize multi-terminal simultaneous communication, break through the disadvantages of traditional wireless competition

WA6322H supports MU-MIMO technology. MU-MIMO technology is the most important feature of 802.11ax. Through MU-MIMO technology, AP can send/receive data information to multiple terminals at the same time, that is, WA6322H can send/receive data to multiple terminals at the same time. Data information, depending on the number of terminal streams. WA6322H can send/receive wireless messages for up to 4 terminals at the same time, breaking through the limitation of traditional wireless network serial communication mechanism, the utilization rate of wireless spectrum resources has been doubled, the number of access users has been greatly improved, and the wireless network has been effectively reduced. The network deployment overhead improves the user experience in the case of high-density users.
 

Realize intelligent cloud access and high-quality wireless network TCO

The WA6322H complies with the 802.11ax protocol standard and can provide access to two different frequency bands to achieve a wireless transmission rate of 1.2Gbps+0.575Gbps. Through the built-in antenna coverage technology, it can effectively provide higher-performance mobile cloud access services in terms of coverage, access density, and operation stability, and assist users to achieve high-quality wireless network TCO (Total Cost of Ownership) .

Support OFDMA technology

WA6322H supports OFDMA (Orthogonal Frequency Division Multiple Access, Orthogonal Frequency Division Multiple Access) technology, AP can further subdivide the wireless bandwidth, use different sub-carriers to transmit data to multiple terminals at the same time, reduce the multi-user air interface in traditional protocols The delay caused by resource conflict and backoff improves the user experience of low-latency applications such as voice and video in multi-user scenarios.

Support spatial multiplexing technology
WA6322H supports SR (Spatial Reuse, spatial multiplexing) technology & BSS Coloring coloring mechanism, identifies the packet color at the link layer and controls the terminal to adjust the transmit power, improves the channel multiplexing capability during high-density deployment, and alleviates the need for multiple users to use the same channel. The interference problem is greatly improved, and the utilization rate of spectrum resources is greatly improved.

Support TWT technology

WA6322H supports TWT (Target Wake Times, target wake-up time) technology, which allows APs to make unified scheduling of terminal wake-up and sleep, which can not only reduce conflicts between terminals, but also reduce the unnecessary wake-up times of terminals to achieve the purpose of energy saving.
 

Green and low carbon design

WA6322H adopts professional green and low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced automatic power saving transmission (E-APSD), intelligently identifies the actual performance requirements of the terminal, rationally allocates the terminal sleep queue, and dynamically adjusts the MIMO working mode.
WA6322H supports Green AP mode, which realizes single-antenna standby, and saves energy more accurately.
WA6322H uses innovative packet-by-packet power control (TPC) technology to dynamically adjust the direct bidirectional power of AP devices and clients on the premise of ensuring successful packet transmission, so as to reduce device energy consumption and prolong mobile terminal standby time. .
 

Provide local forwarding function

When the WA6322H is connected through the WAN, the wireless access device is deployed in the branch office, and the wireless controller is deployed in the headquarters. The traditional forwarding mode is that the data packet is sent by the wireless access device to the wireless controller, and then centralized by the wireless controller. Forward. WA6322H can directly convert data packets into wired format packets on wireless access devices, so that data packets are forwarded locally without passing through the wireless controller, which greatly saves wired bandwidth.
 

Support IPv4/IPv6 dual protocol stack (Native IPv6)

WA6322H fully supports IPv6 features, and the device implements IPv4/IPv6 dual protocol stacks. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register on the wireless controller and provide WLAN services without becoming an information island in the network.
 

Provide EAD wireless access

The EAD (End user Admission Domination, terminal admission control) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces enterprise security policies for user terminals accessing the network. Through the linkage with the security policy server, unqualified wireless clients that are infected with viruses or have system vulnerabilities can be processed in various ways, such as offline, isolation, reminder or monitoring, and only after the wireless clients comply with the corresponding security policies Allows normal access to the network, thereby improving the overall security of the wireless network.
 

Support remote probe analysis

The WA6322H supports a Sensor device for remote probe analysis. Each radio can monitor and capture Wi-Fi packets in the coverage area and mirror them to the local analysis device in real time for network administrators to perform troubleshooting and optimization analysis. The remote probe analysis function can not only perform wireless packet mirroring for working channels, but also poll and sample all channels to flexibly meet the requirements of wireless network monitoring and operation and maintenance.
 

Built-in RF Optimization Engine (ROE)

The WA6322H has a built-in RF Optimizing Engine, which effectively improves the application acceleration capability and quality assurance effect in scenarios such as high-density access and streaming media transmission in wireless deployments through RF optimization based on features and protocols. These include: multi-user fair scheduling, hybrid access fairness, filtering interference, better rate, spectrum navigation, multicast enhancement (IPv4/IPv6), packet-by-packet power control, and intelligent bandwidth guarantee.
 

Support intelligent load balancing

WA6322H supports a complex balancing method according to the number of connected users and traffic. When the wireless controller finds that the load of the wireless termination unit exceeds the set threshold value, the wireless controller will automatically calculate whether the surrounding of the user is still alive for the newly connected user. There are wireless termination units with light load for users to access. If there is, the user's association request will be rejected, and the user will switch to other wireless termination units with light load. However, if the wireless user is not in the overlapping coverage area, traditional The load balancing method often leads to failure to connect to the network, resulting in false balancing. H3C's innovative support for intelligent load balancing technology ensures that the load balancing function is only activated for wireless users in overlapping coverage areas, effectively avoiding the occurrence of false balancing, thereby maximizing wireless network capacity.
 

Support Chinese SSID

WA6322H supports the use of Chinese SSIDs, which can specify SSIDs with a maximum of 16 Chinese characters, and can also use mixed Chinese and English SSIDs, providing greater convenience for domestic users.
 

Fully support intelligent wired and wireless integrated management

All H3C series wireless products can realize WSM-based wired and wireless integrated management through open network management protocols.
WSM is a wireless operation management component developed by H3C on the basis of the next-generation business software platform iMC (intelligence management center, intelligent management center). , service-oriented architecture) architecture, with good scalability, to meet the evolving needs of customer network management. Web-based management system provides a simple and friendly management platform for wireless business managers. In cooperation with the iMC intelligent management platform and other components, it can also realize the panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions of wireless devices, and can unify other devices in the network. management, and truly realize intelligent wired and wireless integrated management.
 

 

Hardware Specifications

 

Attributes	WA6322H
weight	160g
Dimensions (excluding antenna interface and accessories)	86mm*86mm*40mm
Ethernet interface	1 100/1000M electrical port
PoE	Support 802.3af power supply
Built-in antenna	Built-in smart antenna system
Working frequency	802.11ax/ac/n/a: 5.725GHz-5.850GHz (China); 5.47GHz~5.725GHz; 5.15GHz~5.35GHz (China) 802.11ax/b/g/n: 2.4GHz-2.483GHz (China)
Modulation technology	OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, [email protected]/11Mbps MIMO-OFDM(11n): MCS 0-15 MIMO-OFDM(11ac): MCS 0-9 MIMO-OFDM(11ax): MCS 0-11
Modulation	11b: DSS:[email protected]/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac/ac wave2: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM
transmit power	20dBm
Adjustable power granularity	1dBm
reset/restore factory configuration	support
Status Indicator	Blink alternate flashing mode, yellow, green and blue flashing mode in different working states, terminal access breathing flashing mode
Operating temperature/Storage temperature	0ºC~40ºC/-40ºC~70ºC
Working Humidity/Storage Humidity	5%~95% (non-condensing)
Machine power consumption	≤7.92W
safety regulations	GB4943, EN/IEC/UL 60950-1, EN/IEC/UL 62368-1
EMC	EN 55024, EN 55032, EN 61000-3-2, EN 61000-3-3, EN301 489-1, EN301 489-17, EN60601-1-2
surroundings	GB/T 2423, GB/T 13543, GB 4208
RF Certification	FCC Part 15, EN 300 328, EN 301 893, Type Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology
Health	EN 50385
MTBF	>500000H

 

Software Specifications

Attributes		WA6322H
Product Positioning		Indoor placement type dual-band (5GHz 2*2 MIMO+2.4GHz 2*2 MIMO)
11ax support	Working frequency	5GHz+2.4GHz
	802.11ax maximum speed of the whole machine	1.2Gbps+0.575Gbps
	A-MPDU	support
	A-MSDU	support
	MU-MIMO	support
	OFDMA	support
	Maximum Similarity Demodulation (MLD)	support
	Maximum Combined Ratio Reception (MRC)	support
	Space Time Block Code (STBC)	support
	Low Density Parity Check Coding (LDPC)	support
WLAN Basics	Maximum number of access users per radio	512 (the maximum number of users connected to the whole machine is 1024)
	Virtual AP (recommended to set at most 5 per radio in practical applications)	32
	open system/shared key authentication	support
	Broadcast Probe request response control	support
	WPA, WPA2, Pre-RSNA User Hybrid Access	support
	RTS/CTS	support
	CTS-to-self	support
	802.11k/v/r	support
	Hide SSID	support
WLAN extension	STA related	Supports abnormal STA offline detection, STA aging, STA-based statistics and status query, etc.
	Access user limit	support
	Link Integrity Check	support
	Repeater mode	support
security strategy	encryption	Support 64/128-bit WEP, Dynamic WEP, TKIP, CCMP, WPA3 encryption
		Supports multiple key update trigger conditions to dynamically update unicast/broadcast keys
	802.11i	support
	Certification	Support 802.1x authentication, MAC address authentication, PSK authentication, Portal authentication, etc.
	User isolation	support: 1. Layer 2 isolation of wireless users 2. SSID-based wireless user isolation
	Forwarding security	Support packet filtering, MAC address filtering, broadcast storm suppression, etc.
	Wireless Endpoint Admission	Support/Wireless EAD
	SSID and VLAN binding	support
	Intelligent Wireless Service Awareness (wIAA)	support
	wIDS/wIPS	support
	Management Frame Protection (802.11w)	support
AAA	Radius Client	support
	Authentication server multi-domain configuration	support
	Backup Authentication Server	support
Layer 2 and Layer 3 functions	IP address settings	Support: static IP address or DHCP to obtain IP address (optional option 60)
	Native IPv6	support
	IPv6 Portal	support
	IPv6 SAVI	support
	ACL	Support (IPv4/IPv6)
	local forwarding	Support: local forwarding based on SSID+VLAN
	multicast	IGMP Snooping/MLD Snooping
service quality	802.11e	Support WMM
	priority	Support Ethernet port 802.1p identification and marking
		Support wireless priority to wired priority mapping
	QoS Policy Mapping	Support different SSID/VLAN mapping with different QoS policies
	Support L2~L4 packet filtering and flow classification functions	support
	CAR	support
	User Bandwidth Management	Available bandwidth can be allocated per STA, or all STAs can share the total bandwidth by SSID
	load balancing	Support: based on traffic, user, frequency band (dual frequency support)
	Spectrum Navigation	support
	Multicast enhancement	Support: Multicast to Unicast (IPv4/IPv6)
	CAC (Call Admission Control)	Support: based on number of users and based on channel utilization
	SVP Phone	support
green technology	Packet-by-Package Power Control (PPC)	support
	Green AP mode	support
	Dynamic MIMO power saving	support
	Enhanced Automatic Power Save Delivery (E-APSD)	support
	WMM Power Save	support

.

Solutions we can offer

 

We focus on the IDC data center field, have professional enterprise-level products, and provide complete planning and design solutions.

Main Application Scenarios:

Only applies to servers.

 

 

Packaging & Shipping

Delivery time : 15-20 working days after payment receipt confirmed (based on actual quantity).

Original packaging to ensure product quality and safety.

Professional goods shipping forwarder.

After Sales Service

We guarantee that all products are original and authentic. All support after-sales inspection. Regarding xFusion server, we can provide remote technical services and troubleshooting.
In addition to new retail products. Others have used NEW BULK. We provide a complete test report. Please rest assured to buy. The stock is huge. Many products are not released in time. If you need more product quotations. You can email to contact us at any time. 

 

FAQ

Q1: How can I believe that your product is of good quality?
A1: We guarantee that all products are original products.We provide a complete test report.

Q2: When can I get a quote?
A2: We will usually quote you within 24 hours after receiving your inquiry. If you really want to get a quotation and more other questions, you can contact us via trademessage or email.

Q3: Why choose you?
Q3: As an Audited Supplier,we have a good reputation on our customers,because of the good quality,suitable price and good service.

Q4: What is your payment?
A4: T/T wire bank transfer.